Before you stat taking thing apart and pulling, the first step is to remove the seat control panel. There are two little swivels at the rear, people have used a feler guage or something soft to rotate them out of the way, by sliding the tool up or down along the rear edge. The front is held by a leaf spring, there ia s bolt behind it.
There are some fasteners in the door pocket and the usual "rivets" also known as door fasteners, start at the bottom and work your way around. You will have to unplug things, and the panel pushes up to release from the top of the door.
The reverse, swivel the little arms output he panel in from the back getting the arms unde the wood panel and snap the front in. When aligning things a helper comes in handy