To reduce the number of transmission variants UDVA, only one design up
Shift delay vacuum actuator is sold. Your vacuum line should be colored
coded, the green line from the up shift delay switch over valve is
connect to the green vacuum actuator port.

Models which have a mode switch have a pink or red vacuum line
From the transmission mode switch relay, connected to
the red vacuum actuator port.

The white knob on the green actuator is the shift delay adjustment;
Transfer that measurement to the new actuator, if it needs adjustment
cw = lower delay shifts ccw = higher delayed shifts. Note, this is not the
Bowden cable adjustment, it’s the catalytic cold up shift delay strategy adjustment


As said, plug the open ports that are not used, Plug # 000 987 1145
Cap # 140 997 00 20