I seached the archives and would like to adjust my vacuum control valve on my 91 722.358 trans on a 300e.

At this point, I am just trying to improve a delayed reverse engage (only when trans is hot) until I determine if I need to pull the tranny for a believe the B3 reverse clutch.

My question is since I just want to increase pressure somewhat - I will not be using a gauge - just a change to improve performace, even if out of spec .... what is the range that others have used during adjustment?

If you can give me a "1/2" turn is too much ..... that will be helpful as a frame of refernece...


Thanks a buch!

don