Quote:
|
Originally Posted by sbourg
You can't tell by looks. ABS light on is a good indicator the OVP relay has problems. Cracks in pin solder joints inside the case is the usual failure, and they can be reflowed if you are handy with soldering equipment, once you take the case off. Else, buy a new one. Pulling and re-inserting the OVP might get you going briefly, but it won't last.
Steve
|
Damn, the ABS was on, because when I bought the car there was no fuse in the relay and the ABS light was on. After I installed the fuse the ABS light went off and the control valve started to work. I'll just replace the relay and avoid further trouble!!