Quote:
|
Originally Posted by invisik
Hi all,
Thanks for the information. On mine, they did do the copper washers and o-rings. I will go back to the service manager and have them reseat the o-rings and ask about the torquing procedure used.
Just drives you crazy when it doesn't idle right!!
Thanks again. Will post when I talk to the dealer.
-m
|
Did you get the problem solved? I done my number 4 today, new copper washer, and rubber O ring. Now I have this rough idle but runs smooth when running? But idle was very smooth before doing this? Could this problem be from lost pressure? Like you said it drives you nuts.