[QUOTE=rhodes2010]
Hex bits 6, 8, 14, 17, 19. (I don't even have a 19 - hard to find).
Sockets 8, 10, 12, 13,14, 17, 19 - engine turning size too (26 ?)
Wrenches 8, 9, 10, 12, 13, 14, 17, 19, 22, 24, 26 (correct me on these larger ones).
3/8 drive rachet and universal joint with a couple 6 inch extensions.
1/2 drive rachet and couple extensions.

You'll need a 5mm hex bit too. I.ve used it on the brake collar, oil pan, trans cooler lines, vcv. 27 mm thin stubby wrench to remove the oil cooler lines and ALDA. 41 nd 46mm to properly work on the propeller shaft. 10mm hex socket 1/2" drive to remove the front disk from the hub.

__________________
'85 300D Cal 280,000 miles
'14 GLK 350 60000 miles