Mike/Warren - thanks. Warren, I saw your clevis post last night.

Got the left rear door panel off. The glass is all the way down and in a rail under the bottom of the glass is a piece of a white bushing known by some as the "sliding jaw". It's seen in the photo below on the left.

The other photo is of what I'll call an arm that is connected to the regulator. In the photo you'll see the section of the regulator arm that the bushing "used" to connect to. It's reflected in the glass.

OK. The bushing appears to ride in the rail at the bottom of the glass as seen in the photo, but the arm piece that it connects to is now 15" - 16" above the base of the window rail.

I realize that I need to remove the regulator and hook up a new bushing/sliding jaw.

How do I get the window rail where the bushing rides in line to connect to the regulator arm?

Thanks for your time.

Attached Thumbnails

   

__________________
Mike Murrell
1991 300-SEL - Model 126
M103 - SOHC
"Fräulein"