All testing is done at the klima relay... Again the pushbutton sends ground signal to pin # 10 of that relay to turn the compressor ON.

Use voltmeter between pins 5 (power w/key on) & pin 10 to see if there is a command signal.

The ETS should measure 5K-15K ohms.....

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator