You need to remove the cross-over pipe first then the rubber boot between that boot & the actuator. Then the variable runner flap (plastic box) part of the intake must come off. Once that is off you will have room to get the actuator mounting bolts off as well.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator