Use the O.E. brake hoses (hoses can develop a self collapsing internal mode
after LONG use...brake calipers will not release) mostly the problem will be
at the connection between the hose and the nut (a crimp) LEAKS... BAD!

"flare nut wrenches" have a slot cut out one flat (out of six usually) wide ,so
that the wrench can be used in an "Inline" situation.[for example the nuts that
secure the high pressure lines to each injector]I don't know if you need these
wrenches used on brake hose nuts.

SEE "SEARCH" button