|
I DO have a iron block m-117 with no heads, but a m-116 iron block motor with heads..So...fit the 350 heads to the 1976 117 iron block, yes?
What do you suppose the C/R might be ? The 117 is listed as having 8.0 to 1 ratio and the 116 as 9.3 to 1 .
Book reads 116 engine heads having 15.8 mm deep combustion chambers.
117's have 17.85mm deep.....that's quite a few less cc's if the 117 pistons are flat top.
Then there's the intake manifold....the 117 has to be wider between the intakes of the cylinder heads if the 117 block is taller.....what intake did you use?
.
|