Quote:
|
Originally Posted by techguy512
I just replaced my lower oil cooler fitting with the "screwed nipple" (see post #10 in
the thread "Oil Cooler Hose Source" started by tangofox007).
http://www.peachparts.com/shopforum/showthread.php?t=152383
I had a leak at
the threads and when I examined the fitting, there were dents in the sealing surface.
Total cost of repair $25.
Will be buttoning it back up this weekend and we'll see how it fares. |
Based on this thread, I should be able to replace the lines (at least the bottom one) and change the nipple without replacing the cooler. That is assuming that the problem is not in the cooler itself.