Quote:
|
Originally Posted by Bens lover
Ok guy's this is the result of my bench test.
I connected a cable from the small screw on the selenoid and put the other end on the positive of the battery,the other cable was a ground.What happend was the small wheel with teeth on them in the starter came out and went back in when i would remove the cable...Is this what is suppose to happen?I was expecting the stater to kick more then that...Someone help me here im only a novice at this.
regards
Dan
|
that is what is supposed to happen for what you did, although all you did was tested the solenoid. This means you know now that the solenoid is good.
Now you need to test the actual starter motor... to do this you need some heavy cable to go from the back of solenoid (large screw terminals) and still the smaller wire to trip the solenoid and test the starter.