Quote:
|
Originally Posted by BENZOMANIAC
I need to change the belt tensioner on my 87 300E 103 motor, and the 8mm bolt that mounts the fan clutch to puylley is stripped!?
Anyone know how to get that bolt out without removing radiator and condensor?
Thanks
|
It is a simple procedure, but it requires shop air and a right angle air grinder. You will also need a drum shaped grinding bit that has a grinding surface on the end. it is hard to describe but the bit is steel, looks like the shape of a new pencil eraser, and needs to be about 10mm in diameter. Stick it in the end of the bolt and continue inward until the bolt head falls off. Then remove the bolt with your fingers. Hope this is clear.