View Single Post
  #4  
Old 07-10-2006, 08:49 AM
t walgamuth's Avatar
t walgamuth t walgamuth is online now
dieselarchitect
 
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 39,102
how many psi?

i think pvc is rated for at least 100 psi.

if you put a lot of pressure in it you will need to be very careful in prepping the joints. otherwise they will come unglued under pressure. check the rating by the mfgr dont take my word for it.

i think the air compressors have a device that removes moisture from the air so internal rusting shouldnt be a problem. galvanized is usually used, i believe. i have never noted air running through plastic, so there may be a reason you cannot do it. i would check carefully with the pipe mfgr and with the air compressor suppliers. they will know if it will work or not.

tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.
Reply With Quote