|
Hi there,
Those 4.1 engines had a problem with cam bearings. The cam bearings would come loose in the block and slide endways on the cam. My brother had one- the front cam bearing had come clear out of the block and the engine lost oil pressure because of it. It was still running ok but with a knock when I took it out and put a 4.5 engine in. They fixed the problem on the 4.5's. So it might not make any difference, or might not even be a good idea to put heavier weight oil in. If it's a leaky cam bearing, all the heavier oil will do is starve the mains. If you do go with a heavier oil, don't go TOO heavy, you might regret it!
__________________
Richard Wooldridge
'01 ML320
'82 300D 4.3L V6/T700R4 conversion
'82 380SL, '86 560SL engine/trans. installed
'79 450SL, digital servo update
'75 280C
|