Quote:
|
Originally Posted by M.B.DOC
That reading for number 7 is the problem!!!!
13 is = to 13bar times 15 = pressure in psi on the high side..
195psi is WAY too low of a high side reading....are you sure of the re-charge??? if not then the expansion valve OR the compressor is most likely at fault..
Is the drier cool OR hot with the system running.?...should be VERY hot.
|
Thanks for the response.
I had the recharge done at a shop and they used dyed recharge. Could it be a leak somewhere? They said the compressor is still good.
I dont know what a "drier" is - can you explain so that I can tell if it is hot or cool?
Are you also ruling out the possibility of the flaps not working right?
Thanks again for the help.