Thread: thinking of doing a standard rebuild need your input
View Single Post
  #18  
Old 08-18-2006, 07:02 PM
engatwork's Avatar
engatwork engatwork is online now
Registered User
  
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,741
The machine shop owner that I used on the last engine (617) suggested boring and going oversize which I did. I was impressed with the machine shop and the owner. For rebuilding the head, boring the block and polishing the crank the bill was right at $600. They came highly recommended by a 30+ yr MB independent.
__________________
Jim
Reply With Quote