Well I built me a DTC code scanner, very easy it is to make. I pulled codes

Pin 4 - LH-SFI NFF
Pin 8 - Base Module NFF
Pin 17 - Distributor Ignition NFF
Pin 7 - Cruise Control/Idle Speed Control
(Now the dtc code guide states a 16 pin data link connector, well I only have the 38 pin so I went with that on this test)
3 --- Right EA/CC/ISC actuator (left cylinder bank) (M16/1)
6 --- Starter Lock-out/backup lamp switch
Pin 6 - Anti-Lock Brakes
30 --- CAN data line to electronic accelerator/cruise control/idle speed control module
Pin 16 - A/C NFF
Pin 30 - SRS
3 --- Driver Airbag squib
4 --- Front passenger airbag squib
8 --- Voltage supply interrupted

After reading the code I deleted it.

I then started the car and revved up the engine a few times, and rechecked the codes,,, nothing new

Mileage 100704

Now time for a test drive. Remember my ASR has been defeated, I'm trying to seperate the pre ASR (sensors) from the Post ASR (Controls)

Will be back in a few.

mileage 100714

Marty