Quote:
Originally Posted by david s poole
what are you calling the airflow position sender? my understanding is that it is part of the upper plenum,just below the fuel distributor and cannot be purchased separately.besides requires equipment and expertise to set up properly. david poole dallas tx. 214-9567007.
|
You can buy them and set them up properly. Not hard really as I did it a few months ago. All you need it the proper Bosch Part number. And to know how to set it up. There is a procedure on this very forum of how to do it and where to get it.
OP, are you sure a wire is not bad out of the three on it? Check the wiring and ensure that there is not a broken one. And what procedure did you use to set the new one? Mine was visibly worn, and when I put the new on it I noticed the little pins on the sweep arm were not contacting the new on and needed a little adjustment to have proper contact with the new sensor. Had to take it off three times before I could get everything perfect. Only pain is the FPR having to be removed to get the darn screws all out and the lose of fuel pressure making the plate drop so you need to hook all back up and turn key on to test. Just was time consuming.
__________________
~Jamie
_________________
2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's.
1986 190E 2.3 Black, Auto, Mods to come soon.....
|