Quote:
Originally Posted by adrenelin500
I don't know if you remember this forcedinduction but a few weeks ago you gave me some advise on this very subject. I was under the impression that removing the guts of the alda , reinstalling it , and hooking back up the lines was what I was supposed to do . Is this right? Or was I supposed to leave it off altogether and plug the line running to it?
|
You can do one of two things.
1: Remove the ALDA, disassemble, remove the guts, reinstall the empty ALDA and block the boost line.
2: Remove the ALDA, block the boost line and leave the ALDA off.
Reinstalling the empty ALDA can work as a dust cover to keep the bare metal shaft clean and/or to keep a stock look.