Quote:
Originally Posted by dpetryk
90 psi on the supply side almost nothing on the return side.
|
The hose is holding up on all sides, I'm just wondering now if I have everything plumbed to the right place - she wont start right now.
Is there something I'm missing? A procedure to "bleed" the fuel lines of any air?
The Hoses are inplace of rusted through lines. What I did was flare the end of the pipe and connect the hose with the proper clamps. 90 PSI sounds about right, As I've been troubleshooting some small leeks. Does anyone by chance have a schematic of the fuel lines? (More specifically, the ones that run right into the fuel distributer)