Well the ignition is locked tight. after reading post. They say if i can,T turn ignition to position 1 then ill have to drill it out.. Ican get key in but it wont turn, everone 1 here says iam screwed, well i tried to drill it out But i can even get the bit to even scrath the darn thing never mind drill it out. The casing on the Tumbler spins around can even get the bit to bite. So is there some speacial Bit i need ,has anyone ever done this on a 300E. its not on the colume its on the dash. i took everything off so the lock is exposed.But Hey i cant even cut into it. What should i do.