Kenna,

Easiest way to remove the hub cap, and I don't mean the wheel cover, is to pry it off with a straight claw hammer. Just catch the lip of the hub cap with the straight claw and pull up on the hammer handle. Pry it off about 1/2 way and then pry again at 180*. It should come off easily.

U will need an allen wrench to loosen the spindle locking nut.

The rotor and spindle will now slide off the spindle shaft. Slide the spindle and rotor out enough and then back in to remove the wheel bearing. Then take spindle and rotor off. The inside bearings will stay on the spindle.

U will need another allen wrench to remove the rotor from the spindle. These allen screws are usually difficult to remove, U may have to heat them to get them loose.

P E H