|
Juan
As you probably know the O|T mark on the balancer is #1 TDC. Look at the dizzy cap and find #1 plug wire (front cyl on the passenger side). The rotor should match where ever that plug wire is on the cap. I think you are right, I think there is a small line on the top lip of the dizzy itself which will match up with that plug wire position, not sure though. The rotor will "spin" a bit as you move the dizzy into position, make sure you get it lined up when the dizzy is down all the way in, may have to try a couple times to get it right.
Gilly
|