Quote:
Originally Posted by ForcedInduction
1: That's an easy job. There is plenty of documentation on valve adjustment here. I do suggest that you get the two special bent wrenches. (Should be about $60 LINK). I'd also suggest you get the 3rd valve holding wrench. |
i also suggest finding a stubby or shorten a 14mm wrench so you can make minute adjust ments.. i was hung up for 20 minutes on one valve because i could not get the wrench to fit onto the bolt no matter the direction.. plus i used 2 custom shortend wrenches to do the adjusting after my original job and it was soo much easier..