The compressor is fine and the A/C works great. I had the serpentine belt off to check the bearings in all the accessories. I found that the idler puller was noisey, no grease in bearings so I replace it. Everything else was fine except the clutch, when I spun it, it made a rumbling noise, felt like no grease in bearings.

I have the front part of clutch off, but the pulley is still on and seems stuck. I have removed the snap ring that retains the pulley. I'm going to Autozone tomorrow as advised above for a puller.

I've not removed the compressor from the vehicle since I'm doing this job, or at least that's my plan with the compressor installed.