Quote:
Originally Posted by gmercoleza
I thought I'd hear back from you regarding the one I was trying to unload - pity, it seems you already have one.
The bumper does NOT have to be removed. The radiator and fan assembly do, however, along with the crossmember that goes above the radiator. A bunch of rubber will come out along with the fan assembly IIRC, and after that it's pretty straightforward.
|
I found out that the condenser I needed is not the same as the gasser or the E300 non turbo version, there is a special part for the turbo diesel...had this not been the case I would have contacted you about the condenser you had...
On to the next part of the question...you say the radiator has to come out? And the fan you say is that the aux fan? I have removed that already but not the radiator.
Is access to the condenser's fittings gotten from behind once the radiator is out of the way?
The bumper comes off with 4 bolts...seems it would be easier than draining the rad.