To start with that is a W201 chassis... you need to check (OR have checked) the current draw of the auxiliary water pump. should be around 1 amp. measure for at least 1-2 minutes. That controller will go into a "limp" mode if current draw is too high.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator