plugs were just replaced, but old ones were white. good idea on swapping wires. I just changed the distributor cap as well so that should be in good order. What am I looking for when I spray the carb cleaner? I poured some lacquer thinner down the barrels tonight and let them soak a bit. noticed some seeping out the rear carb base, right between theupper insultating plate and the sheild on the front of carb.

Remedy for leak is tightening down the carb? are these screws fairly obvious? Do I have to take off the top of the carb to get to them?

Will look at this all tomorrow and report back,

Thanks!!
Marc