iirc it takes a 12 point 10mm. and you need a 1/2" drive to turn it cause it takes alot of torque to get them out.

with the breaker bar.

good luck. you have to unhook the top of the shock and swing it to one side then the other to get on the bolts.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.