Quote:
Originally Posted by sixto
I don't think the block was touched but it could be a US block using the manifolds that came with the car so the rest of the exhaust wouldn't have to be modified. I wouldn't trust something as easily replaced as exhaust manifolds to determine if it's a US or Euro engine... unless someone says Euro manifolds only work with Euro heads.
Sixto
93 300SD
|
The manifolds are stamped M117, not M116. I had to do a double take on that. And the M117s have a taller deck height right? So the lower wouldn't fit.
Other weird stuff, there is some sensor not plugged in at the pass rear of the block...
