Quote:
Originally Posted by fasthair
HI Iacombe
However once the mounts are replaced you need to readapt the "Sensor Gear Adaptation." If this isn't done chances are good you will get a Check Engine light and have misfire codes. You will need a scanner that has this function in it to re-set the adaptation.
|
Is it just me, or does this just not sound right??
Quote:
|
This job has very tight working quarters and will require a few busted knuckles. My WIS shows 2.4 hours to replace both motor and transmission mounts. Good luck.
|
So, 2.4 hours for all three mounts plus the "readapt"? Not bad..
