Quote:
Originally Posted by Dan Rotigel
Compression test: # 1-210 #2-95 #3-170 #4-225
Leakdown Test: #2-90% Leak-intake valve
|
Notice the difference between the 4 cylinders. That 95 reading is out of spec. all four cylinder pressure readings should be close to each other in value. Not exact but close. Say within 15% or so (don't know the exact % that is correct)
Did they do the compressions test again after squirting oil into the cylinders? If not, by doing so it could bring the 95 reading up. If it does, I would suspect you may have compression ring problems on the piston in that #2 cylinder. Number 3 is a little off too, but I would be more worried about #2.