So I replaced my master cylinder about a month ago, and finally through the help of this site was able to reverse bleed the system.
Unfortunately, I began losing clutch again, and reverse bled a couple of more times over the weeks before I installed a new slave cylinder.
I noticed my slave was clearly shot, so I figured this would end my problems forever.
Wrong. Same problem.
I have followed every line and do not see a leak ANYWHERE.
I don't know what to do.
The good news is, I guess, that I can reverse bleed in my sleep, and it only takes me about 10 minutes start to finish.
I can't go on like this forever though.
PLEASE anyone with any knowledge of what might be the problem or even ideas help me!