Quote:
Originally Posted by Strife
I used one from Accu-Form, Called a DASH-CAP (probably a trademark thing). I think ONCE PROPERLY INSTALLED, the conformity of the part was excellent; too bad the leather grain is coarser than the original.
On the CC hole, making it bigger (once installed) was nasty - I used a cable-operated Dremel-like tool from above and a tiny router bit to do this. But I didn't really install the CC sensor properly because the foam tube was shot to hell. This will have to wait.
|
The foam tube is about $40.00. I dont know what it is there for. On both my cars they were also shot. On one of them someone just put a piece of heater hose in place of the foam. I have no idea whats wrong with that but I figured MB put the foam in for a reason, so I replaced it on both cars. Its easy enough to install.
John Roncallo