View Single Post
  #3  
Old 11-15-2006, 05:37 PM
JimF's Avatar
JimF JimF is offline
'94 S500: only 793 sold!
 
Join Date: Mar 2001
Location: San Diego, CA
Posts: 1,933
Quote:
Originally Posted by ProV1 View Post
JimF,

Thanks for the info. On your website, you mention that the ticking came back even after replacing the oil guides, but autoRX finally cured the ticking noise once and for all? Did the ticking go away during the cleaning phase, or the rinsing phase?
Did you really read the four (4) paragraphs at the bottom of MENU#19 in BLUE??

To summarize; I used a 'engine flush' as stated and then later used ARX to clean/remove any sludge/teflon, etc.

I did use products like Slick 50, Prolong, etc thinking that it would lower friction; well it's all BS and it left some partially plugged oil passages/lifters as its byproducts.

When the ARX was started the tick-tick was intermittant. It could have been, as many say, a byproduct of loosening/removing sludge. But as I remember, the car was 99% tick free during the cleaning phase of ARX.

Now in the maintenence phase, I've not heard a lifter tick in apx 3 years.
__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe

Visit my Mercedes Web Page

Last edited by JimF; 11-18-2006 at 02:05 AM.
Reply With Quote