Quote:
Originally Posted by ForcedInduction
There must have been an error in your measurement. The glowplugs should read in the 0.5-1.0 ohm range.
|
the one good one did read 0.6, one read something like 10k and the rest read up to 30-35k. the last 4 read infinity on the 200 ohm range, i just checked it at higher range b/c i was curious. hayes manual says if the meter reads infinity they are bad.
i tested them by disconnecting the relay and testing plugs themselves. also checked them after taking them out and got same readings. i just re-did the wire terminals where they attach to the GP b/c the insulation was frayed...i doubt it had much to do with the problem but i don't know a whole lot.