Ok gang, I have completed the task of repairing the vacuum leaks and replaced the wiring(plugs).
Was having an Issue with cold start, It would fire up and search for balance and stall.I fattened up the fuel in small increments Until it held the idle. Cold idle on start up is 1000 rpm then balances to 700 rpm.holds that threw out the warm up and warmed condition.
Test drive I had a slight hesitation on acceleration, I added a little more fuel and it cured the problem.
Now we are looking at a stall problem, after it is warm and has gone quite a long time it acts like(if it had a carburetor the choke slams shut) it starved for fuel or was in a flood condition,like it is choking the vacuum gauge goes to the max. Any more thoughts?