Thread: High Beams work; One light out on low beams
View Single Post
  #10  
Old 01-01-2007, 11:06 PM
rg2098's Avatar
rg2098 rg2098 is offline
Detailing Moderator
  
Join Date: Jun 2004
Location: Rochester Hills, MI
Posts: 2,415
Swap the bulbs, if the good one doesn't work on the other side, carefully pry the back off the connector and give the terminals a slight squeeze with plyers. It wouldn't hurt to hit the male ends with a bit of sand paper. These connectors are not weather packed and are prone to a bit of corrosion. That is was exact problem with my right lowbeam.
__________________
Adam Lumsden
(83) 300D
Vice-President of the MBCA International Stars Section
Reply With Quote