just-n-time here with some new questions,First I will try to explain what I did and then give you all the numbers.
All of the tests were done koeo,The harnesses were air pot switch, the ICV
harness,The EHA harness The x11 unit.
I made the test with both analog and digital,so you will see the diff. in the #'s. All readings at r/x-1.
1-pot switch...pin 1&3 4,ohm....1&2...1.2 ohm...3&2...5.4ohm.(#1 pic)

The rest of this testing was done with digital system.
Same test,@2m on the meter. 1&3. (.004) 1&2. (.001) 3&2. (.005)
At 200k............................. 1&3. (4.2) 1&2. (1.3) 3&2. (5.4)

ICV harness.
pin 1&2..(70.8) ....pin 1 to grd (69.1) pin 2 grd.(01.0)

EHA harness.
pin 1&2 ....(45.1)... p1 to grd..(44.3)black wire p2 to grd. (00.7) brown black stripe

EHA p1&2 = 00.0

x11. 1 (24.8) 2 (grd) 3 (02.2) 4 (0) 5 (0) 6 (1--.-) 6-9 same

Attached Thumbnails