|
used several of these options together with a tad of my own.
1-outdoor plug end male
1-outdoor plug female
1-1 roll self-vulcanizing rubber tape
1-1 can of corrosion X (thick)
reterminated end ,expanded cord slightly with rubber tape and closed plug up.wrapped tightly with rubber tape to seal completely.then wrapped female plug completely except for plug holes.squirted some corrosion X into each female hole and plugged together.Weather barrier out and in.for those unfamiliar corrosionX is a (marine) electronic and electrical friendly anti-corrosive.used it the first time ever on a loran unit that had been to the bottom of the harbor.completely flooded with corrosionX,shook out and powered it up.screen needed pulled and repaired but all else worked like a champ.happy dieseling and watch that ice!
|