i thoght i would update you all on my progress so far. I tested the switch tonight, and it works fine, i also tested the actuator. I coud hear the motor run, and it was drawing b/w 145-147 ma, well within the allowable range. I then tested the cilinoid and heard it click in. Just to be posotive i didn't have any broken gears i dismantled the actuator, and it all seems to be pretty solid in there still. My next step is to try to figure out how to get out my old amp when it has a stripped out 11mm socket and in-accessable philips screws. Can we say dremel???j/k Once i get the amp out i'm going to go to a salvage yard and just try one amp after another till one works, and i should have a working, FACTORY cruise system. thanks for the tips everyone, i'd be installing an el-cheapo cruise system if it werent for you all! thanks again,
Ryan