hello to those knowledgable forum members out there.
I am in dire need to know how many wires total connect to this terminal strip (box) located inside the engine bay right in front of the wheel well. Its a little plastic box with a plastic lid w/ hinges.
After I find out how many wires go to this thing, then if fellow forumers would be so kind as to help me, I really need to know the color of the wires, and where each wire goes, starting from the terminal screw-down spot closest to the firewall, and ending with the terminal screw-down spot nearest to the headlight. (there are only 5 partitions, as you will see in my picture, so it wouldn't even be that time consuming)
My starting system has been very mangled by the previous owner in his, actually very successful, double battery setup. Obviously, the wires would have to have been relocated due to the different functions along with the addition an extra solenoid and a series/parallel switch.
This is my current terminal strip:
http://i51.photobucket.com/albums/f361/jr107/300sd005.jpg
Also, I'd just like to make it clear, I'd really appreciate it if nobody asks about the previous system setup. All I am really in need of is possibly a picture of somebody's personal 300sd terminal strip (box), and just some basic info of where the wires go from there. In addition, I'd like to know how many wires are connected to the +terminal of the battery (not including the cable to the starter)
I hope that I have given a good enough explanation of my needs in order for fellow forumers who know a bit about the original starting system setup, to help me out in restoring my system back to stock specs!
Thanks!!!
-SilverBullet