Quote:
Originally Posted by JackG
I didn't have to do that one. after the 4 track bolts are off, just pick seat up slightly and move all the way forward. buckle will stay on seat and slide off the bar with no problem.
|
I agree, did mine exactly the same way, once loose I rolled the seat back and on its side, then pulled it out the rear door, headrest first. As far as the phillips screws underneath the seat, those are for removing the tracks and brackets from the seat bun once the seat is out, they won't detach the floor mounts, they are all accessible once the seat is out, by moving the rails to match round holes over the screws as you remove them.
FYI the bottom seat bun on the 123's are interchangeable between left and right seats. But not the seat backs.