Quote:
Originally Posted by Larry Delor
When you're checking the little rubber stubs on the ends of the vacuum lines, just bend it 90° and look for cracks (buy tubing before hand). Also, if the stub comes off easy, replace it (even if it's not cracking).
Good Luck!
|
I checked those before while dealing with testing the pods they were not unhealthy at all..which BTW hold vacuum just fine.when I pull the yellow check-valve there is a very satifactory hiss.I did not time until it stopped,but suffice to say that it hissed for several moments before stopping.When last I tested the vacuum pump it was giving in the mid 20s if I recall correctly.Is it possible that the vacuum pump is reacting somehow to the temp variances?At first I thought it was just not warm,but after about anhours drive it still does the same thing intermittently.thoughts....