The diagnostic codes are:

PO 341: The camshaft position sensor signal is monitored for errors.

Possible solutions
- Cam sensor defective
- Check connector wiring to sensor
- Engine mechanical condition timing belt/chain out of time.

AND

PO 410: Air injection system is monitored for faults

Possible solutions
- Circuit relay defective or fuse open
- Check connector wiring
- Air pump defective or hoses blocked

I thought I'd try to replace the sensor first and see if the second problem disappeared. Still, I can't find the sensor. Is it visible without removing any other parts? And is it easier to see from looking down into the hood or from the ground looking up?

I will use this site for future parts purchases. It is cheaper, and, I am assuming, more reliable parts.

Can you comment on the hood latches?