Quote:
Originally posted by psfred
I fixed the rough idle on the 87 300D by ..
..............
holders one at a time and lift off the copper ring, put the spring back on, and screw the holder back down to approx. 30 ft/lbs.
...........
Peter
|
Peter,
I think the torque is 30 Nm (22 ft/lb)during the initial torque down. As I was told, retorque it two more times and the final torque is 35 NM (25.7 ft/lb). This is for the 602 and 603 engines only. The 601 engine may be the same. Others engines may have different requirements.
David