Originally Posted by brewtoo

1990 300E. I just recently replaced the evaporator, neutral safety switch, shift bushings and resealed the PS pump, so I thought I'd replace the flex disks next.

Well, the rear is fine but the front has tons of play. I removed the trans crossmember and supported the trans. HOW do you get the 19mm flex disk bolts and nuts loose in that tiny space?? They seemed to be very tight, too. Nothing would budge. Of course, I AM laying on my back under the car (ramps, two jacks, jackstands).

Can anyone shed any light on the details of getting that flex disk out of there?

I gave up and put it all back together for now.

Is there a DIY somewhere?

Thanks