So, I did some investigating, and using a home made code reader tool, I found the following:
Pin 5 gives me Code 10 (CTP (idle) recognition from EA/CC/ISC control module (N4/1), short circuit) (from JimF's site)
Pin 6 gives me Code 13 & 30 (Stop Lamp switch & CAN data line to EA/CC/ISC module (N4/1) (from JimF's site) - Note: the stop lamp switch was replaced a couple of years ago - is this a leftover code?
Pin 7 gives me Code 6 (Starter lock-out/backup lamp switch (S16/3)) (from JimF's site) is a back out lamp broken? wouldn't the dash lamp indicate this?
Pin 17 gives me Code 8 Haven't the foggiest what this means.
What I am wondering is, is it one item that is malfunctioning and causing a cascade effect?
Thanks!!
-Larry